the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Python 4105P Remote Start, 1995 Subaru Impreza


Post ReplyPost New Topic
< Prev Topic Next Topic >
mjm4jc 
Member - Posts: 17
Member spacespace
Joined: December 26, 2021
Location: Pennsylvania, United States
Posted: January 03, 2022 at 1:29 PM / IP Logged Link to Post Post Reply Quote mjm4jc
Perhaps I need to make sure that the virtual tach is programmed????
kreg357 
Platinum - Posts: 7,579
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 03, 2022 at 3:04 PM / IP Logged Link to Post Post Reply Quote kreg357
Take a look at the 4105 programming options. Menu 1 Feature 1 is for the Horn function. The Factory Default is OFF. I would change that setting to Option 2 (20 mSec) or 3 (30 mSec). This will give you the desired results.
Soldering is fun!
kreg357 
Platinum - Posts: 7,579
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 03, 2022 at 3:08 PM / IP Logged Link to Post Post Reply Quote kreg357
Take a look at the 4105 programming options. Menu 1 Feature 1 is for the Horn function. The Factory Default is OFF. I would change that setting to Option 2 (20 mSec) or 3 (30 mSec). This will give you the desired results.
Soldering is fun!
mjm4jc 
Member - Posts: 17
Member spacespace
Joined: December 26, 2021
Location: Pennsylvania, United States
Posted: January 04, 2022 at 10:27 PM / IP Logged Link to Post Post Reply Quote mjm4jc
Yeah I thought I did that. It took me a while to get used to the programming. I will go through the horn programming again. Also, In menu 2, feature 2, I can program the engine run time. But then it also has a timer mode run time?????? It's in menu 2, feature 11. Not sure what that is. Anyway,I started it today with the remote, and it started on the 2nd try. But once it was running, I was not able to use the remote to unlock the doors. Didn't think this was normal. Is this a programming issue?
kreg357 
Platinum - Posts: 7,579
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 30, 2009
Location: Pennsylvania, United States
Posted: January 05, 2022 at 5:00 AM / IP Logged Link to Post Post Reply Quote kreg357
Timer Mode :
Selects the time in minutes that the system operates the engine until the system “times out” when the remote start activates in timer mode. The system may be shut down using a shutdown at any time. More Timer Mode info can be found on the bottom of Page 5 of this 4105V manual : https://www.the12volt.com/installbay/file.asp?ID=1307
Re: Unlock while engine is running
Which FOB are you referring to ( Factory RKE of 4105V ) ?
It's not unusual for the Factory FOB to be inop during engine run time. With the engine running after normal key start up do the Factory FOBs work? If you are referring to the 4105 remotes, do they lock and unlock the doors with the engine off? Did you add solenoid actuators in the doors?
Soldering is fun!
catback 
Silver - Posts: 668
Silver spacespace
Joined: August 13, 2002
Location: Canada
Posted: January 05, 2022 at 2:44 PM / IP Logged Link to Post Post Reply Quote catback
mjm4jc wrote:
But I am confused as to why it doesn't chirp on start up? I thought the main reason for the horn is to give the driver an audible signal that the car is started and running? Please advise.
The horn doesn't sound during a remote start, the parking lights are the only indicators for the remote start signal received and remote start engine running. The horn will chirp (as well as the parking lights flash) to make you aware of lock and unlock commands. Aside from remote starts that trigger on 3x Lock, I'm not aware of any remote starts that make audible tone from the vehicle before or during a remote start.
mjm4jc 
Member - Posts: 17
Member spacespace
Joined: December 26, 2021
Location: Pennsylvania, United States
Posted: January 05, 2022 at 6:06 PM / IP Logged Link to Post Post Reply Quote mjm4jc
Yeah I thought I did that. It took me a while to get used to the programming. I will go through the horn programming again. Also, In menu 2, feature 2, I can program the engine run time. But then it also has a timer mode run time?????? It's in menu 2, feature 11. Not sure what that is. Anyway,I started it today with the remote, and it started on the 2nd try. But once it was running, I was not able to use the remote to unlock the doors. Didn't think this was normal. Is this a programming issue?
mjm4jc 
Member - Posts: 17
Member spacespace
Joined: December 26, 2021
Location: Pennsylvania, United States
Posted: January 08, 2022 at 2:37 PM / IP Logged Link to Post Post Reply Quote mjm4jc
Yeah I thought I did that. It took me a while to get used to the programming. I will go through the horn programming again. Also, In menu 2, feature 2, I can program the engine run time. But then it also has a timer mode run time?????? It's in menu 2, feature 11. Not sure what that is. Anyway,I started it today with the remote, and it started on the 2nd try. But once it was running, I was not able to use the remote to unlock the doors. Didn't think this was normal. Is this a programming issue?
Page of 3

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Sunday, January 23, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer