Adding 4-Way Hazard Flashers To Classic Car

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Adding 4-Way Hazard Flashers To Classic Car

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

rossl

Member - Posts: 1

Joined: November 13, 2024

Location: New Jersey, United States

Posted: November 13, 2024 at 9:48 AM / IP Logged

I am trying to find a suitable switch to add 4 way hazards to my 55 Ford (converted to 12 volts). Front and rear lights are separated on separate legs. The rear brake lights are also used for rear turn signals. Front turn lights have separate dash indicators in parallel

Back to Top

lee.lopez

Copper - Posts: 219

Joined: September 02, 2024

Location: Texas, United States

Posted: November 16, 2024 at 9:09 AM / IP Logged

You can use this as a starting point from your hazard switch:

https://www.the12volt.com/relays/relaydiagram23.html

You'll need to connect a flasher to the output and can use high current diodes to isolate the lights from each other.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.