2008 Honda Civic, Compustar CM3000 Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Honda Civic, Compustar CM3000 Remote Start

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

tekin

Member - Posts: 45

Joined: January 04, 2005

Posted: November 14, 2024 at 7:08 PM / IP Logged

i have a 2008 civic auto

wanna use a old compustar cm3000 brain cause i like the range of the remote start and i have the 2 way remotes for it so, I wanna use that with a idatalink tb module.

can anyone help me with wiring this up and also do i need to computer flash the module or can I just do it in the car

Back to Top

tekin

Member - Posts: 45

Joined: January 04, 2005

Posted: November 14, 2024 at 7:17 PM / IP Logged

i have just never did a install with a bypass unit and the old cm3000 does not have a data port so that is where I am confused and do I need all the starter and ignition wires off the big harness of the cm3000

Back to Top

lee.lopez

Copper - Posts: 219

Joined: September 02, 2024

Location: Texas, United States

Posted: November 16, 2024 at 9:04 AM / IP Logged

You don't need a data port. Just wire the dashed lines in the Idatalink TB manual between the remote start and the bypass.

Yes, you will need to connect the remote start wires to the ignition harness as all the bypass does is bypass the immobilizer.

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.