Add DRLs On 2007 Ford Explorer Sport Trac

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Add DRLs On 2007 Ford Explorer Sport Trac

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

trx_racer

Member - Posts: 1

Joined: October�01, 2026

Location: California, United States

Posted: October�01, 2026 at 12:15 PM / IP Logged

Good Afternoon, ALL

I have a 2007 Ford Explorer Sport Trac that I would like to add DRL's using the current Signal/Running Light socket with Switchback LED bulb. I'm using a 5-pin relay to try and accomplish this task. But, I have been unsuccessful thus far and my search on the web has brought me here to the12volt.com. The signal harness has 3 wires (ground, signal and parking lights (only active at night). The bulb is an 3457 dual filament. I'm not sure to information to really add, so I'll wait for a reply and go into further information if needed. Thank You..TRX

Back to Top

If you wish to post a reply to this topic, you must first login.
If you are not already registered, you must first register.

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.