the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Need a Proven clutch bypass method !


Post ReplyPost New Topic
< Prev Topic Next Topic >
rudbwoy69camaro 
Silver - Posts: 350
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: June 10, 2003
Location: United States
Posted: June 28, 2003 at 9:31 AM / IP Logged  

I've been studying on how to bypass the clutch on my '91 integra.  Again, I am going to in stall an RS3.  Here is the link I've been reading. Here is another the link I've been reading too.  I don't want to hard wire the switch at the clutch pedal-so when the engine is on, you can crank the starter-either purposely or accidentally-I don't like that idea.  I like to keep it safe in a sense.

Please help. Thank you in advance for your time.

Need a Proven clutch bypass method ! - Last Post -- posted image.

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: June 28, 2003 at 9:43 AM / IP Logged  

http://www.velocitymotorsport.com/images/install_notes/107.jpg

http://www.velocitymotorsport.com/images/install_notes/146.jpg

Here are a couple of bypass methods with diagrams

Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: June 28, 2003 at 10:59 PM / IP Logged  
Jump the purple wire on the ribbon cable of the relay pack to 85, +12v on 86, 87 to one of the clutch switch wires and 30 to the other wire. This method only connects the clutch switch together while the remote starter is cranking the starter, not the whole time the vehicle is remote started like listed above.
In other words, us the diagrams in the above post, but instead of ground when running on 85, use the purple wire un the ribbon cable.
Mr.Swifty 
Member - Posts: 37
Member spacespace
Joined: May 27, 2003
Location: Canada
Posted: June 29, 2003 at 12:59 AM / IP Logged  
High up on the clutch pedal arm there is your clutch switch.....find it.....I do believe it is a blue/black wire, there are only two...one has constant ground, and the other has ground when the clutch is pressed in.....tap your negative before starting and while running wire into this wire....this will give the proper ground signal to the car, bypassing the clutch switch.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer