Need Help Wiring up power mirrors

Home / the12volt's Install Bay / General Discussion / Need Help Wiring up power mirrors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Jdmep3

Member - Posts: 2

Joined: August 03, 2003

Location: United States

Posted: August 03, 2003 at 10:39 PM / IP Logged

Hello

I have a 2002 civic si, i just purchased JDM civci type R power folding mirrors. now from the mirrors is 2 wires, 1 is white *power* and other is black * ground*.when black is grounded and white is triggered they fold in, BUT to get them to fold out the wires need to be swappedlike power to the ground and ground to the power

anyone could Possibly draw up a schemtic for me? and possibly run them to a momentary switch

Thanks in advance

-mike

thanks in advace

Back to Top

Ronald Mark

Copper - Posts: 66

Joined: February 03, 2003

Posted: August 04, 2003 at 10:19 AM / IP Logged

4 -wire

wire it like this, you will need 2 push button sw, or one center off.

Back to Top

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: August 04, 2003 at 10:36 AM / IP Logged

you can do this with either a mom switch or two timer relays,. do you have an alarm after market if you do its even easier. email me and let me know i have to think about this

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

greedy111

Member - Posts: 24

Joined: August 01, 2003

Location: United States

Posted: August 06, 2003 at 11:59 PM / IP Logged

the best way to do it is to buy the jdm honda relay that goes with the jdm mirrors. or you could do it like this:

Need Help Wiring up power mirrors - Last Post -- posted image.

your mirrors would be like the actuator. if you have the jdm switch, it would be + to activate the mirror... other wise maybe you could use something like a window switch for open or close.

Back to Top

Ronald Mark

Copper - Posts: 66

Joined: February 03, 2003

Posted: August 07, 2003 at 11:07 AM / IP Logged

I see, you are resting them a ground. took me a few minutes to figure out what was going on. your way is simpler than a 4 wire. A 4 wire rests open.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Need Help Wiring up power mirrors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.