the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

99 Honda Prelude Sunroof


Post ReplyPost New Topic
< Prev Topic Next Topic >
Geeque 
Silver - Posts: 310
Silver spacespace
Joined: October 07, 2003
Location: United States
Posted: December 17, 2003 at 10:39 AM / IP Logged  
Has anyone done a remote sunroof opener for a 99 Prelude, if so how did you do it. I know it requires a few relays and some diodes but before I try to figure it out, I was hoping for some insight. Thanks in advance.
Gary Kline
MECP Master Technician
cableguy13011 
Member - Posts: 19
Member spacespace
Joined: December 16, 2003
Location: United States
Posted: December 17, 2003 at 4:32 PM / IP Logged  
hey try get your hands a product called 529 frome dei it controls one motor in both directions
Cableguy!!!
greedy111 
Member - Posts: 24
Member spacespace
Joined: August 01, 2003
Location: United States
Posted: December 18, 2003 at 3:36 PM / IP Logged  

99 Honda Prelude Sunroof - Last Post -- posted image.

Thats is how the motor for the sunroof is controlled.  In order to remotely control the motor, you would have to apply power to all the +12v wires because they are off when not in accessory mode. You can use the negative output from your alarm to control open and close. 

Geeque 
Silver - Posts: 310
Silver spacespace
Joined: October 07, 2003
Location: United States
Posted: December 20, 2003 at 11:20 AM / IP Logged  
Thanks guys I knew it would take more than one relay. Someone told me it was impossible, but we all know better!
Gary Kline
MECP Master Technician
Geeque 
Silver - Posts: 310
Silver spacespace
Joined: October 07, 2003
Location: United States
Posted: December 20, 2003 at 11:22 AM / IP Logged  
Can someone please give me a printable picture and a little more info?
Gary Kline
MECP Master Technician
Geeque 
Silver - Posts: 310
Silver spacespace
Joined: October 07, 2003
Location: United States
Posted: December 20, 2003 at 11:42 AM / IP Logged  
Wont I need a latching output? A trunk release signal wont be enough to run relays.
Gary Kline
MECP Master Technician
cableguy13011 
Member - Posts: 19
Member spacespace
Joined: December 16, 2003
Location: United States
Posted: December 20, 2003 at 12:01 PM / IP Logged  
thats correct you need a lacthing output but with the dei 529 you dont its single
Cableguy!!!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer