Keyless entry on 2003 Taurus

I've just completed installing an Audiovox keyless entry on my 2003 Taurus.  All works great except the feature to AutoLock doors when car is started.  System option is enabled.  If I manually lock the doors, when I turn the car off the lock will unlock.  The only thing I wasn't sure about was the Door pin trigger.  Per note below I used the Yellow/Black on GEM to connect.  Could that be causing the problem possibly not sensing all the doors shut?

Notes: This wire controls the door ajar indicator on the dash, must cut the wire and diode isolate it from the instrument cluster. Can also use individual negative door trigger wires in the 26 pin plug at the GEM. They are: yellow/black (LF), gray/red (RF), lt. GREEN/ YELLOW (LR), and pink/lt. blue (RR).

Any help would be appreciated.

RW

Nighthawk2k - Not sure what you mean by "wake up the GEM"?  Is there a specific wire I need to tap for AutoLock to work?

Misterjimbo - Do you think the Blk/Blue wire will correct the autolock problem?  I believe I've identified that wire on the harness.

Thanks for your comments.