remote starter w/ keyless entry

Home / the12volt's Install Bay / General Discussion / remote starter w/ keyless entry (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Windstarh2o

Member - Posts: 2

Joined: July 01, 2004

Location: United States

Posted: July 01, 2004 at 11:26 PM / IP Logged

I have just bought a Commando EZ-2500 for a 97 Ford Windstar, does anybody have suggestion/tips for installing? This will be my 1st.

Back to Top

jfk51502003

Copper - Posts: 221

Joined: March 04, 2004

Location: United States

Posted: July 02, 2004 at 10:26 AM / IP Logged

DIRECTWIRE™ WIRING INFORMATION - FORD / WINDSTAR / 1997 / Remote Start

[PRINT THIS PAGE]

12volts	yellow	+	ignition harness
Starter	wht/pnk or RED / blue	+	ignition harness
Second Starter
Ignition	RED / green	+	ignition harness
Second Ignition	BLACK/ green	+	ignition harness
Third Ignition
Accessory	gray / YELLOW	+	ignition harness
Notes: May be more than one - test to verify which one powers blower and A/C controls.
Second Accessory	BLACK/ pink	+	ignition harness
Keysense
Power Lock	pink / YELLOW	-	drivers kick panel
Notes: The keyless module is behind center storage compartment.
Power Unlock	pink/green	-	drivers kick panel
Notes: The keyless module is behind center storage compartment.
Lock Motor
Unlock Motor
Parking Lights+	WHITE/ black		light switch
Notes: One of two, only one is the parking lights.
Parking Lights-
Hazards
Turn Signal(L)
Turn Signal(R)
Reverse Light
Door Trigger	BLACK/ blue	+	kick panel
Dome Supervision
Trunk/Hatch Pin	common with doors
Hood Pin	black	-	at sw under hood
Trunk/Hatch Release
Power Sliding Door
Factory Alarm Arm
Factory Alarm Disarm	GREEN/ purple	-	either kick panel
Disarm No Unlock
Tachometer		AC
Notes: On the 3.0 liter motor the tach wire is yellow/black. On the 3.8 it is dark blue/light green. Follow spark plug wires to coil assembly on both motors.
Wait to start
Brake Wire	RED / lt. green	+	brake pedal switch
Parking Brake
Horn Trigger	YELLOW /GREEN	-	ignition harness
Memory Seat 1
Memory Seat 2
Memory Seat 3

remote starter w/ keyless entry - Last Post -- posted image.

Immobilizer Bypass Module:	Required: No	Type: N/A	Part #: N/A
Notes: N/A

This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.

Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.

Back to Top

Windstarh2o

Member - Posts: 2

Joined: July 01, 2004

Location: United States

Posted: July 02, 2004 at 9:47 PM / IP Logged

Thanks for the data.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

remote starter w/ keyless entry

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.