Dei 998t...help

Home / the12volt's Install Bay / Car Security and Convenience / Dei 998t...help (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Trikzy

Member - Posts: 15

Joined: July 27, 2004

Posted: August 09, 2004 at 9:29 PM / IP Logged

Just purchased a bitwriter for my viper 791xv. tryed plugging it up and hitting read file, and it says "not a valid system". The bitwriter is V 1.4, the car if needed is a 98 acura integra Ls.

any thoughts ?

Back to Top

auex

Platinum - Posts: 5,041

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 09, 2004 at 9:31 PM / IP Logged

The only time I have ever seen that message is when the software isn't up to date. It is the only thing I can think of.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Trikzy

Member - Posts: 15

Joined: July 27, 2004

Posted: August 09, 2004 at 9:40 PM / IP Logged

how do i update the software ?

or is it possible ?

Back to Top

Trikzy

Member - Posts: 15

Joined: July 27, 2004

Posted: August 09, 2004 at 9:41 PM / IP Logged

Do i have to have the key in the ignition, just like when programming it normally?

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 09, 2004 at 9:46 PM / IP Logged

Nope, don't need the key but you do need power. To update the software all you do is replace a chip. Does anyone know the current version of software DEI is on for the bitwriter?

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Trikzy

Member - Posts: 15

Joined: July 27, 2004

Posted: August 09, 2004 at 9:55 PM / IP Logged

power, as in..battery connected, and alarm connected? if so then tha's all connected.

Back to Top

auex

Platinum - Posts: 5,041

Joined: December 23, 2002

Location: Arizona, United States

Posted: August 09, 2004 at 10:10 PM / IP Logged

Alarm must have power, in other words it just needs to be hooked up.

Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.

Back to Top

Trikzy

Member - Posts: 15

Joined: July 27, 2004

Posted: August 09, 2004 at 10:18 PM / IP Logged

yea..it's all connected. hmm.. ok well anyonw know a place to get the replacment chips ?

Back to Top

TazExprez

Member - Posts: 37

Joined: May 14, 2004

Location: United States

Posted: August 18, 2004 at 11:43 PM / IP Logged

The current version of the 998T Bitwriter software is 1.6. You can purchase the software chip at http://www.mralarm.com for $10.00 plus shipping.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Dei 998t...help

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.