1999 mitsu eclipse

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / 1999 mitsu eclipse (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

xavierny25

Member - Posts: 24

Joined: July 28, 2004

Location: United States

Posted: October 05, 2004 at 8:04 PM / IP Logged

i plan on installing a new alarm system in my eclipse and need some help with locating the wires i need for the install.or just the color codes would be good thanx for ur help guys

thanx xavierny25

Back to Top

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: October 05, 2004 at 8:29 PM / IP Logged

This is what I have:

Constant 12 volts	WHITE/ YELLOW	IGNITION SWITCH HARNESS
Ignition 12 volts	BLACK/ WHITE	IGNITION SWITCH HARNESS
Starter	BLACK/ RED	IGNITION SWITCH HARNESS
Dome Light	RED / GREEN (-)	EITHER PIN SWITCH OR COURTESY LIGHT
Trunk Pin Switch	RED / GREEN/ SILVER DOTS	(-) BELOW DRIVER STEP PLATE *
Parking Lamp	GREEN / WHITE (+)	AT JUNCTION BLOCK IN DR.KICK PLATE **
Power Lock	BROWN / WHITE	AT RELAYS BEHIND PASSENGER **
Power Unlock	BROWN	SIDE OF CONSOLE ***

* Two RED / GREEN (-) Wires Present, Meter To Find Right One. ** Also Found Under Driver Step Plate In Rear Body Harness *** Door Lock Control Unit Located In Passenger Kick Panel. Relays Located In Console Accessed By Removing 2 Screws. Then Removing Entire Passenger Side Console Panel.With OEM Keyless. **Negative Pulse Door Locks

Accessories
Window Up	D\ GRN/RED P\ BRN/YEL @ MAIN SWITCH
Window Down	R/ GRN/BLK S/ GRN/YEL
Ign Key Warn	GREEN/ YEL (-) STEERING	COLUMN HARNESS-GROUNDED WITH KEY OUT
Trunk Release	N/A
OEM Horn	GREEN/ RED (-)	STEERING COLUMN HARNESS OR AT RELAY
Headlights	RED	(-) AT HEADLIGHT SWITCH OR RELAY
OEM Alarm Arm	RED / BLUE (-)	IN LOOM BEHIND GLOVE BOX
OEM Alarm Disarm	BROWN / RED (-)	IN LOOM BEHIND GLOVE BOX

Reversal Rest At Ground Power Window Circuit

Remote Start
Tach Signal	WHITE	PIN 58 AT ENGINE CONTROL MODULE *
Ignition #2	BLUE/BLACK	IGNITION SWITCH HARNESS
Ignition #3	N/A
Accessory	BLUE	IGNITION SWITCH HARNESS
Neutral Safety	BLACK / YELLOW	SWITCH ON DRIVER FRONT OF TRANSAXLE
Brake Light	GREEN (+)	(+) AT SWITCH ABOVE BRAKE PEDAL
Reverse Light	RED / BLUE (+)	SWITCH ON TRANSAXLE OR @ JUNCTION BOX
Rear Window Defrost	BLUE/RED (-)	AT DEFOGGER SWITCH

* Engine Control Module (ECM) Located On Driver Wheelwell. WHITE Tach Wire Is Also Located At Pin #6 In A White 18 Pin Connector Behind Driver Side Of Console.

MO

Don't Learn from Others Mistakes

You Might Be the One That Knows.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

1999 mitsu eclipse

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.