the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

97 Acura TL Disabling Factory Alarm


Post ReplyPost New Topic
< Prev Topic Next Topic >
Paketa1 
Member - Posts: 19
Member spacespace
Joined: November 19, 2002
Location: Canada
Posted: October 28, 2004 at 11:03 PM / IP Logged  
Hi guys im trying to permanently disable factory alarm unit could someone help me Please.
draasch 
Gold - Posts: 2,172
Gold spacespace
Joined: February 07, 2003
Location: Florida, United States
Posted: October 28, 2004 at 11:20 PM / IP Logged  
this is for the 96...double check with a meter....
Make:   Acura
Model: 3.2 TL
Year:    1996
Alarm
Constant 12 volts WHITE IGNITION SWITCH HARNESS
Ignition 12 volts BLACK / YELLOW IGNITION SWITCH HARNESS
Starter BLACK/ WHITE IGNITION SWITCH HARNESS
Dome Light BLACK/ WHITE (-) 20 PIN BLUE CONN. IN PASS. KICK PANEL
Trunk Pin Switch ORANGE (-) 10 PIN GRAY CONN. BELOW DRIVER DASH
Parking Lamp RED / BLACK (+) 5 PIN GREEN CONN. AT FUSE BLOCK *
Power Lock GREEN / WHITE DRIVER KICK #201
Power Unlock GREEN/ RED PANEL
* Fuse Block Located In Driver Kick Panel. #201- See Negative Pulse Door Lock Diagram.
Accessories
Window Up D\ RED / YEL P\ BLU/YEL D\ GRN/YEL P\ YELLOW @ MAIN #211
Window Down F/ RED / BLU F/ BLU/GRN R/ GREEN R/ YEL/GRN SWITCH
Ign Key Warn BLUE/WHITE (-) STEERING COLUMN HARNESS
Trunk Release N/A CABLE OPERATED
OEM Horn BLUE/GREEN (-) STEERING COLUMN HARNESS
Headlights BLUE/RED (-) STEERING COLUMN HARNESS *
OEM Alarm Arm GRAY (-) DRIVER KICK PANEL **
OEM Alarm Disarm GREEN/ ORANGE (-) 20 PIN GRAY CONN. IN DR. KICK PANEL
#211- See Reversal Rest At Ground Power Window Circuit Diagram. * BLUE/RED (-) Wire Can Also Be Accessed In 18 Pin Gray Connector Below Driver Dash. BLUE/RED (-) Changes To BLUE/GREEN (-) In This Connector. ** OEM Alarm Standard.
Good Luck
David
Ace Security
813-376-9778
Tampa
Donate to the 12volt
Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: October 28, 2004 at 11:52 PM / IP Logged  
If you get the right  wire on the gray plug on the driver's kick panel area, when you lock the doors, the LED on the door will not illuminate.
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer