the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Stinky Heat Shrink?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Teken 
Gold - Posts: 1,492
Gold spacespace
Joined: August 04, 2002
Location: Aruba
Posted: November 17, 2004 at 8:09 PM / IP Logged  
Last week one of the project managers ordered some PVC & Kynar heat shrink tubing for us. As our regular supply of polyolefin heat shrink tubing was all gone.
Now I have used almost all types of heat shrink tubing and am not accustomed to the extreme smell and odor this type(s) of heat shrink tubing leaves behind.
I used various heat settings, and all of them give off a extremely bad aszz odor, which I can assure each of you smells like a stink bomb.
So, my Q would be, why the hell would anyone sell, or buy anything that smells so bad???
Based on the smell and the odor, I would have to gather it cant be that healthy for anyone who is around this stuff all day long.
I am the poor soul who has to heat shrink two miles of wiring in the next 2 months.
So you can see why I am annoyed and concerned about this smelly aszz product.
Just because its clear, sure doesnt make it better, thats for sure.Stinky Heat Shrink? - Last Post -- posted image. Stinky Heat Shrink? - Last Post -- posted image. Stinky Heat Shrink? - Last Post -- posted image.
Knowledge is power. But only if you apply that knowledge in a positive way, which promotes positive results in others.
EVIL Teken . . .
Teamrf 
Gold - Posts: 1,031
Gold spacespace
Joined: January 13, 2004
Location: United States
Posted: November 17, 2004 at 10:30 PM / IP Logged  
I don't use heat shrink I just use some good ole Super33 electric tape, and I've never had a problem with it. It is pretty expensive though..5 bucks a roll.
~The Rookie~
Rookie of the year that is...
Don't let the smoke out of your equiptment..it doesn't go back in.
91cpe 
Member - Posts: 27
Member spacespace
Joined: May 31, 2004
Posted: November 29, 2004 at 8:23 PM / IP Logged  
No experience with toxic heat shrink. One related question though, have any of you guys used a heat shrink with hot melt wax inside? It's supposed to stop corrosion in solder joints by creating an air tight seal around solder joints.
If anybody knows where I could find something like this please let me know.   
stubs 
Member - Posts: 31
Member spacespace
Joined: August 19, 2004
Location: United Kingdom
Posted: November 29, 2004 at 9:45 PM / IP Logged  

Just a quick question... something that's always bugged me;

How do you guys heat-shrink a connection, if you've stripped an existing wire part way down, and soldered a wire on... Like a "T" connection, if you get my drift..

Do you just tape it, or do you cut the wire to place the heat-shrink over first?.. Or can you get some sort of "magic" heat shrink for this pupose? ha ha ha

Just a thought, as I use tape, but heat-shrink would be better I suppose...


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, February 2, 2023 • Copyright © 1999-2023 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer