the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

3 negative pulses from single wire?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Haku 
Copper - Posts: 204
Copper spacespace
Joined: November 22, 2002
Location: United States
Posted: December 04, 2004 at 10:45 AM / IP Logged  
Pull a pulse off the door lock motor wire, not the control wire. It is a B+ pulse, but if needed you can convert it to B- with a relay (if the RS901 wont accept a B+). The wire you can use is a Lt Green (Lock), or Tan/Lt Green (unlock) both found in the drivers kick panel or door harness.
Hak
Siemens Autostart
Page of 3

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer