the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

How to install Pioneer's AVIC-N1


Post ReplyPost New Topic
< Prev Topic Next Topic >
larkster 
Copper - Posts: 98
Copper spacespace
Joined: October 04, 2003
Location: Canada
Posted: December 27, 2004 at 1:11 PM / IP Logged  

use the manual adjust buttons on the deck to adjust it so it doesnt hit the dash once you set it manually it will only open that far next time you turn the deck on. unless memory power is disconnected. then you will have to adjust it again.  there is also settings in the system to adjust the flap set back on or off and other features as well.

after all connections made to unit you have to hit the reset button for everything like the gps to work properly if you add something or unplug something you will have to reset it again.  the reset button is on the front of the deck to the right side below the disc slot.

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer