Honda Head Unit Aux

Home / the12volt's Install Bay / Car Audio / Honda Head Unit Aux (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

toiday

Member - Posts: 1

Joined: January 02, 2005

Location: United States

Posted: January 02, 2005 at 1:27 AM / IP Logged

I have a 2005 Odysey EX. The head unit has a XM/AUX button. I want to use the AUX input to add sound for a DVD player. Can anyone help me out with the 14-pin connector pin-out?

Thanks!

Back to Top

biker8018

Copper - Posts: 46

Joined: November 23, 2004

Location: United States

Posted: January 02, 2005 at 3:49 AM / IP Logged

Honda Head Unit Aux - Last Post -- posted image.

Return to Protocol Converter Catalog

Return to Application Guides

INSTALLATION INSTRUCTIONS FOR THE HON-AUX

The HON-AUX will convert the CD changer port of the Honda/Acura radio to an auxiliary input.

NOTE: For proper operation of the HON-AUX, the factory CD changer, if present, will need to be disconnected from the factory harness.

· Compatible with Pioneer Universal XM Satellite Digital Tuner System (GEX-FM903XM), when used with PIE Part# PIO/P-RCA.

· Compatible with Sony Universal XM Satellite Digital Tuner System (DRN-XM01R, DRN-XM01C), when used with PIE Part# 3.5-RCA6MM.

CAUTION: Before any connections are made, P.I.E. strongly recommends that all circuits be verified with a voltmeter before interfacing with them. Always set the parking brake before working on any vehicle.

DO NOT force connectors together as pin damage may occur. This installation will be flawless if you take your time making the connections described below. Following the installation sequence below is critical to ensure proper recognition of the CD changer by the factory radio.

INSTALLATION:

1. Disconnect the negative battery terminal.

2. Remove the Honda radio to gain access to the connectors on back of radio.

3. Determine the plug type and configuration. (See diagram on reverse) NOTE: Vehicles with separate cassette decks will use this adapter at the data port on the back of the cassette deck. NOTE: Vehicles that are pre-wired for a CD changer will need to have the DATA cable removed from the radio in order to install the HON-AUX.

4. Connect appropriate length patch cord (not included) between HON-AUX and auxiliary device.

5. Reinstall the factory radio.

6. Reconnect the negative battery terminal.

VERIFY OPERATION:

1. With radio on, activate auxiliary device.

2. Press 'CD' button on radio to gain access to auxiliary audio input.

3. Display on radio will show CD 1 TRACK 1, and the audio of the auxiliary device will be heard.

4. Adjust volume levels of auxiliary device. (If applicable)

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Honda Head Unit Aux

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.