blazer transmission failure viper 791

Home / the12volt's Install Bay / General Discussion / blazer transmission failure viper 791 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

wowbw7

Member - Posts: 13

Joined: November 22, 2004

Posted: January 07, 2005 at 7:39 PM / IP Logged

recently installed a Viper remote starter/alarm in girlfriends '97 chevy blazer ..just basic start/siren/door lock/ install...nothin' fancy...since install, the auto transmission fails to shift properly ( stays in 3rd gear from all the time). and 'check engine' light remains on. obd2 reader hookup shows 3 codes related to the transmission shift solenoid circuit. have found reports on other forums that his is common if a remote starter has been improperly installed (oops!) the starter works fine but does anyone know where I went wrong? thanx

Back to Top

promodeepcycle

Copper - Posts: 152

Joined: October 17, 2003

Location: United States

Posted: January 07, 2005 at 7:53 PM / IP Logged

you didnt grab the "third"ign wire....

dont be a pet monkey ..use your dmm

Back to Top

Search for other posts by promodeepcycle

mobile1

Silver - Posts: 479

Joined: February 23, 2004

Location: United States

Posted: January 08, 2005 at 1:12 AM / IP Logged

that or the ignitions are not powered up in the right order

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: January 08, 2005 at 10:08 PM / IP Logged

white 2nd ignition wire isn't powered up.

hook it up to the pink/white wire on the alarm.

unhook battery for 20 minutes.

start truck with key, you vehicle will be happy again.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

wowbw7

Member - Posts: 13

Joined: November 22, 2004

Posted: January 10, 2005 at 1:52 PM / IP Logged

thanx for the help guys...extreme1, you hit it right on the nose...thanx to all who replied

Back to Top

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: January 10, 2005 at 10:06 PM / IP Logged

isnt' having someone who's done this same thing before handy :).

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

blazer transmission failure viper 791

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.