Venture Remote start

Home / the12volt's Install Bay / General Discussion / Venture Remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

yyqbear

Member - Posts: 2

Joined: January 10, 2005

Location: Canada

Posted: January 12, 2005 at 12:50 AM / IP Logged

I have a 99 Chevy Venture. I have a CT-3300 hooked up. I can get it running only with the emerg. brake pedal activating no head lights or in the daytime. It seems to loose the Tach after dark or when the headlights are on.

Back to Top

ck auto

Copper - Posts: 257

Joined: September 20, 2003

Location: Canada

Posted: January 23, 2005 at 10:51 PM / IP Logged

hi what wire did you use for tach what did you use for bypass module

good luck

kirk

Back to Top

yyqbear

Member - Posts: 2

Joined: January 10, 2005

Location: Canada

Posted: January 24, 2005 at 7:17 AM / IP Logged

I used the white wire from the split cover on the engine. I used the CT300 bypass system.

I got it running. I just hooked up the ground wire (active when remote is started) to the emerg. brake wire. Works well.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Venture Remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.