Clifford matrix rsx3.5

The only thing that came in the box is a 3pin connector but its attached to a module(relay pack) which has an additional 5 wires coming from it. The manual does not say anything about it?

the bag it came in should have had an instruction sheet.... it is simply a 451M dual relay module... you dont need to add anything...it already has two micro-relays in the little black box...

and the BLACK/ white neutral safety wire gets connected to the on/off toggle valet switch included in the box.... one wire goes to ground and one wire goes to the BLACK/ white wire in the harness....

kgerry that is the problem I have the bag contained no instructions does someone have a schematic for this I checked Clifford website and could not find anything.

Everything else is working as it should the only thing left is the lock and unlock connections.