the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Wiring an after Market Pioneer


Post ReplyPost New Topic
< Prev Topic Next Topic >
Rkodis 
Copper - Posts: 54
Copper spacespace
Joined: December 01, 2004
Posted: January 20, 2005 at 9:43 PM / IP Logged  
Anyone got ideas with the popping sound? i think i have an ugly ground connection or the speaker wires for the rears are out of phase? or just not tight? or touching one another or mixed up? anyone ? please thanks!
Ravendarat 
Platinum - Posts: 2,806
Platinum spacespace
Joined: February 23, 2004
Location: Canada
Posted: January 20, 2005 at 9:56 PM / IP Logged  
Sounds like a ground issure to me. Try regounding the deck and if it still doesnt work try running a deck ground right back to the same place as the amp ground. Let me know what happens
double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer
Rkodis 
Copper - Posts: 54
Copper spacespace
Joined: December 01, 2004
Posted: January 21, 2005 at 2:53 PM / IP Logged  

I will change the grounding route, instead of going to the wire harness i'll look for a spot with a bolt or screw.

Then i'll sand it down a bit until i see nice clear metal. and bolt / screw it there? and i'll see if it makes a popping noise i'll keep you updated. Thanks!

Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer