High / powerless mids

Home / the12volt's Install Bay / Car Audio / High / powerless mids (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

nickvr

Member - Posts: 42

Joined: January 06, 2005

Location: South Africa

Posted: February 09, 2005 at 4:48 PM / IP Logged

Hi again... Is it normal for sound to be really 'dull' when 'punch' / loudness (RF 9210) control are off? When the punch control is turned off, the sound from my Calibra splits sound like cheap portable radio... (ok almost). It still plays quite loud but with no power. I was wondering if something could be wrong here or is it just the speaker / amp quality? I don't think its the HU but suspect it could be the AMP ($130 Blaster) if any. I cannot really turn gain up as the speakers do play loud and high.. Any advise will be appreciated. Thanks

Nick

Back to Top

Poormanq45

Silver - Posts: 597

Joined: October 27, 2004

Location: United States

Posted: February 09, 2005 at 8:44 PM / IP Logged

A "loud" button usually increases the speaker output by about 3Db at certain frequencies. If your system requires the "loud" function to be used, in order to sound good... I think that you are under powering your speakers.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

High / powerless mids

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.