Clifford 3.5 RSX remote problem

Home / the12volt's Install Bay / Car Security and Convenience / Clifford 3.5 RSX remote problem (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

jejrthompson

Member - Posts: 3

Joined: February 09, 2005

Location: United States

Posted: February 09, 2005 at 5:22 PM / IP Logged

I have a Clifford 3.5 installed in my 2002 Mustang GT. Recently, the remote will not send commands to the system to arm/disarm. But, it will receive pages (i.e. valet mode notification). Does anybody have any ideas on the possible causes?

Back to Top

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: February 09, 2005 at 6:05 PM / IP Logged

Try reprogramming your remote.

Do it right the first time

Back to Top

jejrthompson

Member - Posts: 3

Joined: February 09, 2005

Location: United States

Posted: February 09, 2005 at 6:11 PM / IP Logged

How? I have both the installation and owner's guides and neither really say how. I even tried to re-sync the code-hopping feature.

Back to Top

raydawg357

Silver - Posts: 769

Joined: June 17, 2003

Location: United States

Posted: February 09, 2005 at 6:17 PM / IP Logged

Turn the ignition forward and press the valet button once then hold. When you hear the alarm chirp, press the lock button on your remote. Release the valet button turn off the ign. This should do it.

http://www.directechs.com/guides/manuals/og/clifford/G919564_01-05.pdf

Do it right the first time

Back to Top

sroth140

Silver - Posts: 513

Joined: August 27, 2003

Location: United States

Posted: February 10, 2005 at 1:27 AM / IP Logged

unplug both ends of the antenna, then plug them both back in.

MECP certified installer

Back to Top

jejrthompson

Member - Posts: 3

Joined: February 09, 2005

Location: United States

Posted: February 18, 2005 at 12:15 AM / IP Logged

That still didn't help. The remote will recieve the pages from the unit. It just won't send commands back.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Clifford 3.5 RSX remote problem

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.