nissan remote start problems

I have installed a Performance Tecknique Alarm System with remote start onto a 2004 Nissan Altima. Everything on the system works fine except the remote start. I was able to start the car about nine times in a row at first then once the morning. Untill recently I found out that there is a  second starter wire that needed to be hooked up. How should this wire be connected with only one output start wire from the alarm system? And does this nissan need an alarm bypass for the key? I have not been able to get it started since install. Please Help!!  Thank You.

                                  Joe

use the output (starter) to control another relay, to feed the second starter.fuse the second starter reay properly.

Yes you need a bypass

http://www.bypasskit.com/