the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Front sound stage


Post ReplyPost New Topic
< Prev Topic Next Topic >
racer427 
Silver - Posts: 381
Silver spacespace
Joined: August 04, 2004
Location: United States
Posted: March 04, 2005 at 6:45 PM / IP Logged  

Ok, I am gonna go that route then. Cruthfield has the 9833 on sale for $299 which is a hell of a good deal.

  Chris

Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
racer427 
Silver - Posts: 381
Silver spacespace
Joined: August 04, 2004
Location: United States
Posted: March 11, 2005 at 6:35 PM / IP Logged  

Hey guy's,

    Just an update, I received my Alpine 9833 the other day and Finally got to install it today. I am still playing around with the crossover, EQ and Time correction but, so far, I am very impressed. I think the system sounds much better Bi-amped vers. using the passive crossovers. Unfortunatly, my sub amp took a crap on me. I am sending it to MTX to have it fixed and will hopefully have it back in a few weeks. Thanks for all the good advice.

  Chris

Alpine CDA-9833 HU
Diamond Audio M661 Components
MTX Thunder T6.6 Components:rear fill:
Cadence Q400 4 Channel Mains + rears
Thunder 801D Subs
MTX 1004 10's
Dual 4g wire to rear
4g grounds
ophidia31 
Copper - Posts: 78
Copper spacespace
Joined: November 13, 2004
Location: United States
Posted: March 12, 2005 at 8:32 PM / IP Logged  

kfr01 wrote:

Channels 1 and 2 = regular components ... high passed at 350hz.  

Amp Channels 3 and 4 = midbass drivers ... low passed at 350hz, high passed at 80hz
Amp Channel 5 = subwoofer driver ... low passed at 80hz.

This is pretty much how i had it in my 91 caprice except a little tweaking to it. Had the 6 1/2 comp. running 90hz+ and instead of 2 midbass drivers i had a single 8ohm 2 "center channel running bridged off the rear at 350hz+. a seperate 2ch amplifier for an 8" midbass downfiring under the dash at 150Hz and below and a mono amp for the 12 in woofer in the back playing 100hz and below.  im duplicating the same thing in my current vehicle except going to be using a jl 6 1/2 downfiring microsub instead of an 8" under the dash. the components are running off of their crossovers with no help from the amplifier or crossover on the headunit and have the tweeters attenuated at -3db. there is a major lack of midbass when using the crossover in the eclipse headunit which ive noticed. i still need to aim the tweeters in the factory location but other than that, its about as good as it was in my caprice. i guess it just goes to show with a little ingenuity (sp?) theres nothing you cant do. Front sound stage - Page 4 - Last Post -- posted image.

Page of 4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer