spacer spacer spacer spacer

gauge pod problem

Post ReplyPost New Topic
< Prev Topic Next Topic >
Silver - Posts: 246
Silver spacespace
Joined: November 17, 2004
Location: United States
Posted: March 03, 2005 at 8:13 AM / IP Logged  

i installed a crimestopper remote start into on 03 gmc envoy, and now when ever you start the truck, with the starter or the key, the needles all dive, twitch three times and then return to rest. they all work, but you can also hear a grinding sound when they move down now too. not up, but only down. any ideas?  i've already disconnected the tach wire i hooked up, under the hood, at the bcm, blue plug white wire, and when that had no effect, i pulled the fuses on the remote start, which also didn't help.

doc t 
Copper - Posts: 169
Copper spacespace
Joined: April 11, 2004
Location: South Carolina, United States
Posted: March 03, 2005 at 12:01 PM / IP Logged  
my venture mini van gauges do the same thing...minus the grinding. did it do this before you installed the alarm? mine has always done it.
All Bleeding stops.....eventually!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Tuesday, October 3, 2023 • Copyright © 1999-2023, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer