the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2001 Accord / Remote Start / Bypass


Post ReplyPost New Topic
< Prev Topic Next Topic >
bbcardwiz 
Member - Posts: 5
Member spacespace
Joined: March 05, 2005
Location: United States
Posted: March 05, 2005 at 11:01 PM / IP Logged  

20927 model.  bought for me about  4 years ago.  mom got it for me as a gift. i think she got it from a napa or autozone.  retail purchase, obviously.

here's the link to the model you are thinking about.  2xx24.

http://www.designtech-intl.com/Content/techsupport/documents/section05/20024-28v3-1.pdf

my manual isn't available online (that I could find).  i have about 5 programmable options.  way less than the 2xx24's have it seems.  here are my options.  1) no tach vs tach, 2)10 min runtime vs 15 min runtime, 3) normal vs extended crank, 4) normal vs super crank, 5) N/A 6) N/A 7) Enable vs No "enable" feature 8) N/A

so, pretty basic stuff.  after what you've read, is your suggestion still viable? LMK what you think.

thanks -chris

jimmeezgolfvr6 
Silver - Posts: 258
Silver spacespace
Joined: March 10, 2002
Location: Canada
Posted: March 06, 2005 at 7:11 AM / IP Logged  
if you want to avoid going into the door panel, there is still another option available. in a previous post it was mentioned to have the AutoCommand unlock your doors first, then lock again after remote-started. your AutoCommand should have outputs labelled "factory disarm" and "factory re-arm". just connecting these to the car's door lock wires will result in exactly what that post said. i have a strong feeling though that there's one flaw with this option.....most customers don't like the idea that the doors have been unlocked during those 10 to 15 seconds or so of going through the remote-start sequence. that's why i didn't suggest it. and besides, getting a wire into the door panel of that particular car is actually quite easy in comparison to many other cars.
all problems can be resolved with a hammer
solartech 
Member - Posts: 28
Member spacespace
Joined: January 05, 2005
Location: United States
Posted: March 06, 2005 at 9:51 PM / IP Logged  
some times the factory re arm wire will not rearm or "lock " untill the remote starter shuts down.Which would mean the doors would be unlocked durrin the RS operation. If you had the 24 series you could easly do this but since you do not, the best soultion would be to go into the door.
Solartech Window Tinting & Electronics Inc.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer