Router Bits

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / Router Bits (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Ultimate Bass

Member - Posts: 5

Joined: March 26, 2005

Location: United States

Posted: April 03, 2005 at 3:34 PM / IP Logged

I have a router, but what kind of bits are best for cutting out speaker holes in mdf.

Thanks

Back to Top

lilbenny

Copper - Posts: 116

Joined: April 01, 2005

Posted: April 03, 2005 at 5:41 PM / IP Logged

hey im a beginner but if you search most recomend a straight bit and a straight upward spiral... correct me if im wrong..

Back to Top

DukeDuke

Silver - Posts: 206

Joined: November 01, 2003

Location: United States

Posted: April 03, 2005 at 6:53 PM / IP Logged

Straights are good, but flush trim is another great bit to own

Duke Duke

Back to Top

John64

Member - Posts: 30

Joined: March 25, 2005

Location: United States

Posted: April 03, 2005 at 7:33 PM / IP Logged

Straight carbide bit with a criclr jig. From trimming a straight bit with a guide.

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: April 03, 2005 at 10:52 PM / IP Logged

I have them all!!!!

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Back to Top

Dyson

Copper - Posts: 70

Joined: March 16, 2005

Location: Ireland

Posted: April 07, 2005 at 6:33 AM / IP Logged

1/4" straight cut flute bit with a circle jig is the one.

handy to have a selection of router bits for finishing though., most common ones i use are 3/8" round over bit, 1/4" flush trim bit, rabbeting bit and 1/4" staight cut.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Router Bits

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.