Amp going into protection mode

Home / the12volt's Install Bay / Car Audio / Amp going into protection mode (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

forbidden

Platinum - Posts: 5,352

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: November 01, 2003

Location: Alberta, Canada

Posted: April 22, 2005 at 3:09 PM / IP Logged

^^^^ add to this to ensure that the ground return is below 1/2 ohm of resistance. This is a major leading cause of amplifier failure on the power supply and output stages.

Top Secret, I can tell you but then my wife will kill me.

Back to Top

skoldspuppy

Silver - Posts: 342

Joined: July 11, 2004

Location: United States

Posted: April 22, 2005 at 3:45 PM / IP Logged

Thanks to all who gave input to this

It turned out to be the amp its self, before my dealer would send it back, he had it bench tested at a local electronics repair shop here in south florida, it just wouldn't stay out of protect mode

So I got a Loaner Memphis 16-PRD500.1 for free until mine gets back from the shop, we put in in and it worked like a charm, its not as powerfull as the MC series but will at least give me some tunes

I consider this matter closed and again extend my thanks to all who gave input to this

Later All

--Skold

2004 Honda Civic Ex 4Dr

Kenwood DDX-7015/W Nav

4 Fosgate T152C

Hifonics Brutus BX1500D

RE XXX 12 in a 4 Cube Snail Shell

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Amp going into protection mode

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.