the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

96 cavalier passlock 1


Post ReplyPost New Topic
< Prev Topic Next Topic >
trkbyerjr 
Member - Posts: 1
Member spacespace
Joined: July 09, 2005
Posted: July 09, 2005 at 11:47 AM / IP Logged  

I recently purchaced a 96 cavalier, the engine was locked up and i replaced it I get no spark and everything checks out on the scanner. the anti theft light is on and does not go out? is there any way to bypass the passlock 1 system without installing a remote start module?  Thanks, trkbyerjr

genehewett 
Copper - Posts: 152
Copper spacespace
Joined: December 12, 2003
Location: Georgia, United States
Posted: July 10, 2005 at 7:11 PM / IP Logged  
    Yes you can, however I recomend having it repaired correctly. I dont feel comfortable spelling out how to do it but you should be able to get it with this diagram. Good Luck.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, September 25, 2017 • Copyright © 1999-2017 the12volt.com Donate to the12volt.com Advertising Top of Page
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Donate to the12volt.com
Top
the12volt.com spacer
the12volt.com spacer