is it necessary coat a layer or two on inside?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / is it necessary coat a layer or two on inside? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bsinnest

Member - Posts: 20

Joined: July 10, 2005

Location: Canada

Posted: July 27, 2005 at 10:22 AM / IP Logged

Hey, i was just wondering if it is really necessary to try to coat a layer or two on the inside of the encloser. I have the holes for the subwoofer cut out and could possibly get some of it, but am positive that i won't be able to get it all covered in the inside.

Thanks for the help.

Back to Top

oonikfraleyoo

Gold - Posts: 1,069

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 04, 2005

Location: United States

Posted: July 27, 2005 at 10:59 AM / IP Logged

As long as you have enough layers, it doesn't matter if they're inside or out.

Nik

Jeeputer Progress

[|||||||||||-] 90%

Check it out.

Back to Top

placid warrior

Silver - Posts: 357

Joined: November 06, 2004

Location: Canada

Posted: July 27, 2005 at 1:43 PM / IP Logged

if u want though some areas worth trying to get to are where the fleece meets the MDF and around the MDF sub ring, just adds that much more strength to those areas.

Back to Top

Search for other posts by placid warrior

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

is it necessary coat a layer or two on inside?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.