Getting wire into Dodge Ram doors

Home / the12volt's Install Bay / General Discussion / Getting wire into Dodge Ram doors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

giff

Member - Posts: 38

Joined: November 23, 2002

Location: Afghanistan

Posted: November 29, 2002 at 10:03 PM / IP Logged

Any tricks on getting new speaker wire through the rubber tube that bridges the gap between the door and the car?

Back to Top

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: November 30, 2002 at 12:18 AM / IP Logged

You have to take the door panel off and pull the rubber boot off from the door and the body so the rubber boot is dangling on the wires. You will be able to see light from outside when you do this ( from inside the cab ) and you can run new wires through the door and into the boot and then through the cab.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Back to Top

Search for other posts by Velocity Motors

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Getting wire into Dodge Ram doors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.