03 ram N2 install?

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / 03 ram N2 install? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

draggindakota

Member - Posts: 4

Joined: October 19, 2003

Location: United States

Posted: August 18, 2005 at 3:04 PM / IP Logged

I just got an N2 that I'm installing in an 03 Ram 2500 diesel. I just wann make sure I've got all my bases covered before I start. I did a search and came up with a couple things...

VSS Wire-The diagram shows WHITE/ orange wire @ pin 27 of the PCM, but doesn't say what engine. I saw a post the said it was pin 11 on the PCM for the 04 diesel

Back up wire-This is just the wire to the back up lights right?

Parking brake wire-This can just be grounded right? Or hooked to a switch?

One more question. I'm probably going to be getting another N2 for my 93 dakota. I can't find any info on the vss wire for this truck. It's a 3.9v6 with the a500 auto trans

Thanks in advance

Back to Top

draggindakota

Member - Posts: 4

Joined: October 19, 2003

Location: United States

Posted: August 19, 2005 at 11:23 AM / IP Logged

Anybody?

Back to Top

Teamrf

Gold - Posts: 1,031

Joined: January 13, 2004

Location: United States

Posted: August 19, 2005 at 5:10 PM / IP Logged

You can't just ground that brake wire on the N2, it won't work like the older models. You will actually have to hook up that to your brake.

~The Rookie~

Rookie of the year that is...

Don't let the smoke out of your equiptment..it doesn't go back in.

Back to Top

slab42

Copper - Posts: 56

Joined: March 18, 2003

Location: United States

Posted: August 19, 2005 at 6:21 PM / IP Logged

I hope the truck does not have the infinity system in it, cuz if it does, it could be a PITA... but anyway, actually the N2 can be easily hooked up to bypass the parking brake. just ground the parking brake wire, and if you flip the unit over (the actual deck, not the brain) there is a foil sticker about 1" x 1/2" on the bottom. peel it off, and you will see two contact points on the board labeled R197, just drop a bead of solder on them to connect the two... DONE! have fun!

Back to Top

Slammed_Am

Copper - Posts: 117

Joined: December 07, 2002

Location: United States

Posted: August 26, 2005 at 7:58 AM / IP Logged

even if it is infinity, all you should have to do is connect remote turn on.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

03 ram N2 install?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.