the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

What's the difference of these two?


Post ReplyPost New Topic
< Prev Topic Next Topic >
Aruman 
Silver - Posts: 363
Silver spacespace
Joined: July 27, 2005
Location: Aruba
Posted: September 27, 2005 at 1:57 PM / IP Logged  
Hi guys, i've been told that a Subwoofer that is in a Sealed "Hacth" Enclosure will perform a lot much Better than a Subwoofer that is in a Sealed "Square" Enclosure, is that true? how is the performance? they said me that the one in the Hatched will perform a lot much better because the frequency will not reflect so that it cause an cancellation compare with a Square one, So, is this 2 true? what's the difference between these two Enclosures?, Thanks Guys.
DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: September 27, 2005 at 1:59 PM / IP Logged  
That's a lie.  Whoever told you that is ill-informed.  Enclosure-related standing waves have next to no effect on subwoofer performance.
Support the12volt.com
tcss 
Silver - Posts: 1,623
Silver spacespace
Joined: June 07, 2004
Location: United States
Posted: September 27, 2005 at 2:36 PM / IP Logged  
Also a little bit of stuffing on the back of the box would eliminate any reflection.
There is no such thing as free installation!
Francious70 
Silver - Posts: 629
Silver spacespace
Joined: July 26, 2004
Location: United States
Posted: September 27, 2005 at 2:43 PM / IP Logged  
I personally prefer the "Hatch" box as compared to the cube. When the waves come off the backside of the cone and hit the back wall in a cube, they refect right back and hit the backside of the cone. In a hatch, you don't have that problem.
haemphyst 
Platinum - Posts: 5,054
Platinum spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: January 19, 2003
Location: Michigan, Bouvet Island
Posted: September 27, 2005 at 2:57 PM / IP Logged  
Francious70 wrote:
I personally prefer the "Hatch" box as compared to the cube. When the waves come off the backside of the cone and hit the back wall in a cube, they refect right back and hit the backside of the cone. In a hatch, you don't have that problem.
If you can HEAR, and I mean REALLY HEAR the difference, you are a superhuman (and you're gonna have to show me that you can pick out one enclosure over the other MORE than 50% of the time, in blind tests). The waves you are dealing with are FAR to long to EVER be noticeable as a reflected sound, and I GUARANTEE THAT.
If you are running full-range, you MIGHT be able to hear reflected sound difference, but anything below about 500Hz, forget it. Actually, if your box is one foot deep, that frequency is 1130Hz. So, it ain't gonna happen, my friend.
It all reminds me of something that Molière once said to Guy de Maupassant at a café in Vienna: "That's nice. You should write it down."
dwarren 
Platinum - Nominee - Posts: 1,811
Platinum - Nominee spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 03, 2004
Location: California, United States
Posted: September 27, 2005 at 3:05 PM / IP Logged  

I was skeptical about the standing wave issue as well with the construction of my box for my IDQ's. However upon ID's assurance and the actual sound (it is a rectangale) I haven't been able to notice any issues what so ever.

And if there is any such problems, I am sure poly fill would do the trick.

DYohn 
Moderator - Posts: 10,741
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spacespace
Joined: April 22, 2003
Location: Arizona, United States
Posted: September 27, 2005 at 3:16 PM / IP Logged  
Not only can you not hear it, you can't even measure it.  Enclosure geometry (other than physical size) has no effect on subwoofer frequencies woofer performance.
Support the12volt.com

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Saturday, April 20, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer