dual woofer wiring ?

Home / the12volt's Install Bay / Car Audio / dual woofer wiring ? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

justtin00j

Member - Posts: 1

Joined: October 02, 2005

Location: United States

Posted: October 02, 2005 at 11:55 AM / IP Logged

i have two alpine type-e SVC and a rockford fosgate 600 watt amp. it has 50w x 2 at 4 ohms, 100w x 2 at 2 ohms, and 200w x 1 at 4 ohms bridged. i was wondering if i could wire both subs to the bridge them so they would be getting 200 watts. my amp is a rockford fosgate 201 punch.

Back to Top

Blowntweeters

Silver - Posts: 650

Joined: June 03, 2005

Location: Nevada, United States

Posted: October 02, 2005 at 12:15 PM / IP Logged

you can run that amp at 2 ohms brigded and get 200 to each sub. just brigde the amp and wire the subs in parralell. be sure to set your gain correctlly.

1974 ford pinto 4 15" punch Z power punch bd 1001 pioneer DEH-6700

Back to Top

bumpingjeep

Copper - Posts: 149

Joined: September 12, 2004

Location: United States

Posted: October 02, 2005 at 12:18 PM / IP Logged

good luck with that...i reccommend a different amp

1987 Huffy...spinners...two 15's custom mounted to the back

Back to Top

fingaz22

Silver - Posts: 410

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 11, 2005

Location: United States

Posted: October 02, 2005 at 12:39 PM / IP Logged

what ohm are the subs 4 or 8 ohm? if you over load that amp it will pop! sounds like your stuck 4 ohm stereo or 8 ohm bridged to operate right with out blowing that amp. but another amp would be a good choice

JUST ONE MORE AMP!!!

hu,alpine cva 1005/dva 5205

sound processor,symmetry(first one).

sub amp,power 1000 the terminator.(1992).

subs,spl comp dual 1 ohms.

punch 150hd on a 10" ev.

alotofhighs

Back to Top

bumpingjeep

Copper - Posts: 149

Joined: September 12, 2004

Location: United States

Posted: October 02, 2005 at 12:41 PM / IP Logged

all type e's are 4ohm svc...if they are new

1987 Huffy...spinners...two 15's custom mounted to the back

Back to Top

krazykevin

Member - Posts: 5

Joined: September 16, 2005

Location: United States

Posted: October 03, 2005 at 2:11 AM / IP Logged

I have the same setup as you justin. The punch 201s pushing 2 Punch 10's. I was wanting to do the same thing, run both speakers bridged at 2ohmsin parallel. But from the way it sounds, it might not be a good idea.

Question: Can we run like this and set the gain down a bit to where we are getting more than the 50 watts but not overheating the amp? Can you run like this "IF" you set the gain correctly and get a little better performance over the 50w X 2 setup?

Thanks

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

dual woofer wiring ?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.