led turn signal mirrors

now i'm totally lost. ff-mike some more help will be appreciated.

Here's the edited pic. Ya, I wasn't sure how much power was possible to flow through them. This is what you'd do with relays instead of diodes: Power can't go back through. So you'd run a fused constant to the relays' 87 pins, ground the 85 pins, the positive off the alarm for the parking lights to the 86 pins, and the LED mirrors to one of the 30 pins, and the parking lights to the other 30 pin. Nothing will go back when your turnsignals regularly turn on. This is it. Nothing else needs to be done. Once you do this, you should in theory (sometimes sht happens) have no problems whatsoever. I gaurantee nothing, but this is how I would do it on my vehicle, if I'd do something like turnsignals on my mirrors.87 Astro 4.3L; Eclipse CD5000

88 Bronco 351W on 32x11.5x15 Yokohamas, Clarion Phaze 1 Components.

Home: MTX Thunder8000 in truck box & Parts Express amp.

That pic isn't working right, at least on my computer. This should be it, which is changed on the first page now:87 Astro 4.3L; Eclipse CD5000

88 Bronco 351W on 32x11.5x15 Yokohamas, Clarion Phaze 1 Components.

Home: MTX Thunder8000 in truck box & Parts Express amp.