2006 Ram Diesel remote start

Has anyone put a remote start in one of these yet? if you did..congrats! but how do you turn off the ABS and Brake lamp in the MIC after you put the key in the ignition? re:2006 Ram 3500 deisel

Those stay on because of the Acc. wires. There may be more than one or the wrong one is connected. I noticed on my 2002 Ram that when I go to turn the key to the off position if I turn it slow there is a point to where the radio shuts off and the two lights come on ABS/Brake but the engine is still running. My remote starter doesent have a problem but the acc wires is just an asumption.MECP certified (If it really means anything)

Jeremy

its a 2006 ,totally different beast.

Hmmmmm....nope, still only 1 MUX wire that comm.s with ignintion-on.before and after remote start. the MUX wire vt/brn...turns on everthing hvac,MIC,wipers radio.when a resister is used. Chrysler Tech.

Clarion dealer

Black Widow,Ungo alarms.

General electrical

Nate_Dogg wrote: Hmmmmm....nope, still only 1 MUX wire that comm.s with ignintion-on.before and after remote start. the MUX wire vt/brn...turns on everthing hvac,MIC,wipers radio.when a resister is used.

You can use a viper 456L self learning resister lock module to do the start/acc wires on that vehicle. Otherwise 3 relays, one interupts the PURPLE / brown, one shows start resistance, the other shows acc resistance.Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

I seeeeee..... sounds interesting thanksChrysler Tech.

Clarion dealer

Black Widow,Ungo alarms.

General electrical