bulldog rs1100 problem

I just finished installing my bulldog rs1100 that I got used off ebay into my 94 explorer. Everything when well, it would start my truck no problem, lock/unlock the doors without a glitch. I was happy untill I decided to reset the memory using the steps in the manual. I held down on the brake, turn the key on/off 5 times with in 4 sec, the unit then flashed the patking lighs 3 time. then I disconnected all the wiring for 1 minute. Upon reconnecting the unit the parking lights started to flash none stop and thats all it does now, flash the parking lights over and over and over. Pressing the buttons on the remote doesn't help, i even tryed reseting the unit agian but all is does is flash. Can anybody tell me WTF is going on. Thanks Justin

it's a bulldog. send it back.EK Civic

security

no audio

if everything was working fine, why did you decide to reset it?Kevin Gerry

Certified Electronics Technician

MECP First Class Installer

Owner/Installer

Classic Car Audio

since 1979

it's in safety mode..... but they do suck but anyways u have to connect everything back up they lights will start to flash... step 1 open the hood step 2 step on the brake. step 3 whyle holding on the brake turn key to on position and they should stop