ungo remote start

I'm trying to find the installation manual for a saa4295 remote start piece. It is installed along witha ms8200 in the truck I just bought. It currently doesn't work and am wanting to reinstall it. Also if there are any programing directions for it. Thanks in advance.

with engine running press the button(s) for aux. function which engage the remote start. you must to hear the relays. remove the key from ignition and see if the engine still running. if you have a manual transmission must have the hand-brake engaged before pressing the button. the single programing feature for this model is engine run time. try this and if don't start I'll send you the wires.

I tired that and nothing happened; so if you can send me that info it would be great. You can post it here or e-mail me. Thanks for the help. fatheadjames@hotmail.com

Main connector: violet - ign out (+) -> violet (don't connect these two wires at the ign key. you will burn a transistor on remote start) green - (+) led out -> red led wire yellow - (-) start command -> aux. function yellow/.... WHITE/ brown - (-) starter disable in -> blue BLACK/ white - (-) sensor defeat out -> gray/black black - ground PURPLE / white - (+) ign input -> connect with purple large wire blue/black - (+) brake pedal input GREEN/ purple - (+) wait to start input -> connect with blue large wire (for diesel engine connect to glow plug) orange - (-) running light (don't use) GREEN/ YELLOW - (-) hood switch WHITE/ yellow - tach input Large wires: purple - IGN blue - STARTER (to starter) red - +12V white - ACC yellow - STARTER (to ign key) 2 pin connector (back): WHITE/ orange - (-) hand brake (use just for manual transmission) WHITE/ blue - not used For run time programing: system off, engine off. open the hood and press the remote start activation button. press 1 time = 1 minute, press 2 times = 2 minutes.....(max. 256 minutes). for each press led will go on. good luck! you will need.

Thanks for the info man. I guess this thing is just fubar. Oh well guess I'll buy a new alarm.