the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 G6 Remote starter


Post ReplyPost New Topic
< Prev Topic Next Topic >
peppy 
Member - Posts: 7
Member spacespace
Joined: December 26, 2005
Location: United States
Posted: December 26, 2005 at 12:29 PM / IP Logged  

I need more info on the ignition wire & access. wire hookups. Never dealt with a car that had no starter wire before

Iam installing an Autopage RS- 625 with a Pats Gm 2 Transponder

peppy 
Member - Posts: 7
Member spacespace
Joined: December 26, 2005
Location: United States
Posted: December 26, 2005 at 12:32 PM / IP Logged  
  Sorry had a typo , its an Autopge RS- 615 with the Pats GM 2 Transponder
tampa77 
Copper - Posts: 65
Copper spacespace
Joined: October 09, 2003
Location: United States
Posted: December 26, 2005 at 7:43 PM / IP Logged  

I have never heard of no starter wire?  Anyway follow this link, has all data and a relay digram to get it going.

Hope it helps, never done one before.

http://www.directwholesale.net/diagrams/diagram.asp?ModelID=19159&MakeID=35&link=BULLDOG

Tampa77

uffdog 
Member - Posts: 45
Member spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: December 01, 2005
Location: United States
Posted: December 26, 2005 at 7:55 PM / IP Logged  
 You can also pick up some tips by reading some of the Colorado installs ,I believe it also does not use a starter wire , it don't hurt to read read read ,before you burn out or fry any of those expensive ecm,bcm etc
rfd
peppy 
Member - Posts: 7
Member spacespace
Joined: December 26, 2005
Location: United States
Posted: December 27, 2005 at 10:54 AM / IP Logged  

I need confirmation that I should use the 1 wire hookup to the white wire using 2 # 775 relays & a 1500 ohm resistor for unlock. If this is not correct please advise.

tampa77 
Copper - Posts: 65
Copper spacespace
Joined: October 09, 2003
Location: United States
Posted: December 27, 2005 at 12:12 PM / IP Logged  

One wire is right.

Follow the digram and you should be all set.  This is similiar to multiplex sytstems and is not uncommon at all.

Tampa77

peppy 
Member - Posts: 7
Member spacespace
Joined: December 26, 2005
Location: United States
Posted: December 28, 2005 at 9:24 PM / IP Logged  
 Thanks everyone for your help & tips. Finished the install & everything works great

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, April 16, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer