Bull Dog Remote start

Home / the12volt's Install Bay / Car Security and Convenience / Bull Dog Remote start (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

gfreek

Member - Posts: 3

Joined: December 29, 2005

Location: United States

Posted: December 29, 2005 at 6:47 PM / IP Logged

Have a model RS82, installed it last year and it worked fine all winter. During remodelling I lost the remote. I ordered a new one, followed the instructions to erase the memory per install manual and per new remote. When I powerup the unit it clicks 3 times. I know that are a cheap unit !! Anyone with any ideas??

Back to Top

Falcon 1

Copper - Posts: 130

Joined: November 15, 2003

Location: Canada

Posted: December 29, 2005 at 10:27 PM / IP Logged

Does it stop after it clicks 3 times. Or does it keep clicking and lights flashing. If it keeps going and lights are flashing they have info on their site how to stop it.

If your unit keeps clicking and flashing lights this is how to correct it:

if you have a 4 BUTTON REMOTE CONTROL:

You will need to take the unit out of safety mode, to do this you will

need to ground the hood pin switch wire, then put your foot on the brake,

next hit any button on the remote and the clicking will stop. Then you will

need to take the hood pin switch wire off of ground and take your foot off

of the brake and see if the remote will work with the unit

if you have a 2 BUTTON REMOTE CONTROL:

You will need to take the unit out of safety mode, to do this you will

need to put your foot on the brake, next hit any button on the remote and

the clicking will stop. Then you will need to take your foot off of the

brake and see if the remote will work with the unit

Do it right the first time, only a doctor can bury his mistakes.

Back to Top

gfreek

Member - Posts: 3

Joined: December 29, 2005

Location: United States

Posted: December 29, 2005 at 10:42 PM / IP Logged

It's a 2 button remote. It stops after 3 clicks. I've tried different procedures,pressing the brake pedal & turning the key off to on 4 to 8 times. Completely unplugging the unit and repowering, that is when it clicks 3 times. & stops. I've tried grounding the wire for the hood safety switch and using the button. According the install manual, the lights should continue to flash till I program it, thats not happening.

Back to Top

Falcon 1

Copper - Posts: 130

Joined: November 15, 2003

Location: Canada

Posted: December 30, 2005 at 6:01 AM / IP Logged

Have you tried programming after it stops clicking? I have installed a few bulldogs and I don't remember the lights continuing to flash until programmed although the units do click when powered for the first time.

Do it right the first time, only a doctor can bury his mistakes.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Bull Dog Remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.