the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Alpine SEC-100S siren problems


Post ReplyPost New Topic
< Prev Topic Next Topic >
copekyle 
Member - Posts: 36
Member spacespace
Joined: January 04, 2006
Posted: January 05, 2006 at 4:28 PM / IP Logged  
Recently I installed an Alpine SEC-100S alarm in my accord. When I started the siren output (brown wire) was pulsing voltage when the alarm went out. When I finished the install and hooked up this wire (the last one to be hooked up), it was showing a 12 volt constant charge. Any ideas what happened? Did I fry my out put wire? and if so, can I use the auxilary headlight wire to hook into the car's horn?
Thanks in advance
abinns 
Member - Posts: 3
Member spacespace
Joined: January 10, 2006
Posted: January 11, 2006 at 7:32 PM / IP Logged  
My siren wire is doing the exact same thing. Have you been able to fix yours?

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer