Vehicle interior lighting

Home / the12volt's Install Bay / Lights, Neon, LEDs, HIDs / Vehicle interior lighting (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

ingolf

Member - Posts: 21

Joined: January 17, 2006

Location: United States

Posted: February 02, 2006 at 9:43 PM / IP Logged

WIRE, resistor - LED1+, -LED2+, -LED3+, -LED4+, WIRE

The resistor can go anywhere on the Neg side on the positive side, even wired in the middle of the LEDS.

where you say that it could go in the middle, if i was in series. would that cause the led's before the resister to intake alot more current then they should be? causing a burn out, or am i thinking wrong

Back to Top

audio_excess

Member - Posts: 1

Joined: January 26, 2006

Location: United States

Posted: February 04, 2006 at 5:45 PM / IP Logged

http://www.oznium.com/forum/images/diagrams/10.gif

Here is a diagram or correct series wiring for LEDs

Always a Pleasure,

AE

Back to Top

total_overkill

Copper - Posts: 93

Joined: November 24, 2005

Location: Canada

Posted: February 04, 2006 at 9:25 PM / IP Logged

Same thing but visual. They started on pos side also. No resistor added in that diagram but 4 might not need 1. U say potato I say potatto,

40 grit has saved my life sometimes =[

Back to Top

Search for other posts by total_overkill

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Vehicle interior lighting

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.