MDF sawdust as thickener?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / MDF sawdust as thickener? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

audionut405

Member - Posts: 10

Joined: December 29, 2005

Location: Canada

Posted: January 25, 2006 at 8:03 PM / IP Logged

s-monster wrote:

I was wondering if anybody ever tried mixing in mdf sawdust as a thickener with the resin. Is there a reason why I shouldn't try that?

I have researched fiberglass a lot and that technique has come up a few times. As others have mentioned, talc works just as well.

Back to Top

smonster

Copper - Posts: 49

This member has made a donation to the12volt.com. Click here for more info.

Joined: June 21, 2005

Location: United States

Posted: January 26, 2006 at 5:00 AM / IP Logged

Where do I get talc? I am using foot powder right now, smells nice but I would rather it not be so minty.

Back to Top

total_overkill

Copper - Posts: 93

Joined: November 24, 2005

Location: Canada

Posted: January 26, 2006 at 5:29 AM / IP Logged

Actually I was wondering about the fibreglass dust you get from sanding??? Also thought of adding it in with Bondo at certain stages, Like a FB Bondo. This any good as an idea?

40 grit has saved my life sometimes =[

Back to Top

Search for other posts by total_overkill

05honda

Copper - Posts: 100

Joined: May 27, 2005

Location: United States

Posted: January 26, 2006 at 10:45 AM / IP Logged

I was also wondering the same thing......my sander collects the excess dust....could this be added to the resin for strength.......

Back to Top

youngone

Silver - Posts: 269

Joined: September 28, 2005

Location: United States

Posted: January 26, 2006 at 9:14 PM / IP Logged

sounds like a plan try it and see what happends.

Want to know some good equipment- JL,Adire Audio,Mcintosh,Brax,Helix,Eclipse,JBL,RE,Dimoand Audio,Zapco, pritty much anything DYhon,Forbidden recommend

On the12volt you give some info and you get in

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

MDF sawdust as thickener?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.