04 Nissan Titan, 791xv

Home / the12volt's Install Bay / Car Security and Convenience / 04 Nissan Titan, 791xv (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

rcantu71

Member - Posts: 16

Joined: June 18, 2005

Posted: January 19, 2006 at 11:09 PM / IP Logged

yeah I tapped at the door switch. I'll try to get warranty on it. sucks just put it in too.

Back to Top

rcantu71

Member - Posts: 16

Joined: June 18, 2005

Posted: January 20, 2006 at 12:18 PM / IP Logged

ok. I have another problem for my 04 nissan titan. I have the autoheadlights which need to have a negative pulse sent to the driver's door trigger so the RAP (retained accessory power) shuts down.

Is there a wire on the alarm or relay I can send this pulse so that the truck thinks the door was opened then in a minute it would shut down the lights?

thanks all

Back to Top

bazzgazm

Copper - Posts: 113

Joined: June 06, 2004

Location: United States

Posted: January 20, 2006 at 2:15 PM / IP Logged

Yup. Factory alarm rearm would send a pulse as soon as your ignition locks kicked in to rearm the factory security with a - pulse, you could relay that and send it to the door trigger (make sure you diode-isolate it from the door trigger input on your alarm, that'd be cute) Anyway. It will work, just gotta know what you're doing

Back to Top

bazzgazm

Copper - Posts: 113

Joined: June 06, 2004

Location: United States

Posted: January 20, 2006 at 2:20 PM / IP Logged

I have a big question. You said..... "i'll talk to the guy who sold it to you" heh.. but if you bought it from any authorized DEI dealer.. viper is sold at an installed price? so.. now i'm kinda confused.

Back to Top

rcantu71

Member - Posts: 16

Joined: June 18, 2005

Posted: January 20, 2006 at 3:28 PM / IP Logged

I got it from the web. he had it dropped shiped from directed. the seller told me it's got a 1yr guarantee. not the same as lifetime guarantee.

Back to Top

rcantu71

Member - Posts: 16

Joined: June 18, 2005

Posted: February 04, 2006 at 8:02 PM / IP Logged

Hi all,

been out of town. I bought the Bitwriter and it took care of the problem. the manual in hand and from directed's website were both incorrect. After 2 minutes of programming it was all and good! I knew it wasn't me but I did doubt myself a little.

thanks guys for all your help!

Back to Top

Mwsounds

Copper - Posts: 61

Joined: January 04, 2005

Location: Alaska, United States

Posted: February 04, 2006 at 8:51 PM / IP Logged

How much was the Bitwriter? I haveone, but need a new chip for it since DEI updates there software. Any idea where I can buy the new chip?

Thanks,

Mike Ward

Get it done right the first time!

Back to Top

rcantu71

Member - Posts: 16

Joined: June 18, 2005

Posted: February 04, 2006 at 10:28 PM / IP Logged

i paid $75 on ebay for mine. you can buy a chip there too I think

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

04 Nissan Titan, 791xv

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.