Modding Avic-N1/N2 Nav DVD’s

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation - Hot Topics / Modding Avic-N1/N2 Nav DVD’s (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

sly_

Member - Posts: 4

Joined: July 08, 2005

Location: Canada

Posted: April 16, 2006 at 11:03 AM / IP Logged

Does the N3 use the existing wiring I have in place for my N2 or are there new wires?

I'm thinking of getting the new N3 since I want the enhanced XM display and memo features.

Thanks

infinkc

Copper - Posts: 438

Joined: October 28, 2002

Location: United States

Posted: April 16, 2006 at 11:22 AM / IP Logged

pioneer_west.jpg

pioneer_east.jpg

Disc cover scans.

There are 10 types of people in the world, ones that understand binary and ones that dont.

knightrider2000

Member - Posts: 15

Joined: March 22, 2006

Location: United States

Posted: April 16, 2006 at 12:59 PM / IP Logged

Any luck getting the east torrent up yet??

Matt

Search for other posts by knightrider2000

whtcrxghst

Copper - Posts: 210

Joined: August 05, 2005

Posted: April 16, 2006 at 2:18 PM / IP Logged

Thats a hardware change, not software. Gotta buy an N3 if you want the sweet ipod and xm display

iracekx wrote:

Has anybody seen with the N2 if up grading the software to the N3 software does it give the better Ipod features just curious.

free_refil

Copper - Posts: 72

Joined: November 10, 2005

Location: United States

Posted: April 16, 2006 at 8:13 PM / IP Logged

Sorry for the delay with the v60 East Coast DVD guys. I've had a bit of difficulty with Alcohol 120% and I haven't had the time to get it fixed. I got the software up and running Saturday but the wife had the car and also the DVD. I am dumping the disk right now and will RAR it when complete. If it is finished by the time I am going to bed than it'll be up tonight. If not, it will be up first thing in the morning and I will post a link. This torrent will have a copy of the cover of the CD as well as a NFO with links to torrent's of the old software and the West Coast DVD. I have continued to seed the old software and the West Coast DVD.

Pioneer AVIC-F700BT

Polk Audio MM6

Alpine MRD-M605

Alpine MRV-F450

Alpine SWR-1242D

RF 1 Farad Cap

Streetwires ZN Interconnects

KnuKoncepts Power Wire

wrecklesswun

Member - Posts: 46

Joined: January 20, 2006

Posted: April 17, 2006 at 1:50 PM / IP Logged

Am i the only one who used a Radio shack science fair from the 80's...? Kidding. Datwo, just curious as to whether or not you will use the actually brake circuit, or create your own. I would also think it may screw with the ABS and or Stability assistance or Traction controls systems. I could be wrong though.( If you actually use the cars braking system)

Datwo

Member - Posts: 48

Joined: February 01, 2005

Posted: April 17, 2006 at 2:12 PM / IP Logged

wrecklesswun, I am making my own. Its easy because the timer 555 IC can run on +5 - +15 volts. only a few components are required to make a variable oscillating circuit. Then tie the output to the gate of a transistor and you got a way to pull the parking brake lead to ground with a solid state switch instead of a relay. Then you can play with the rate of speed and duration of the pules with variable capacitor and a variable resistor. Very simple circuit. Hell your rat shack science fair kit probably had a 555 timer IC. Google search for "555 timer circuit" and you will find many. What you wanna build is an oscillator. A very low frequency one.

wrecklesswun

Member - Posts: 46

Joined: January 20, 2006

Posted: April 17, 2006 at 7:46 PM / IP Logged

the goal is to send pulses above 2-3 mph...as the video lockout occurs @ exactly 5 mph.

free_refil

Copper - Posts: 72

Joined: November 10, 2005

Location: United States

Posted: April 17, 2006 at 8:00 PM / IP Logged

Ya the upload is mine. I dunno why you can't connect, probably because I was paused for a minute there. Just let it run, and make sure your torrent client is setup properly with your router, etc.

Pioneer AVIC-F700BT

Polk Audio MM6

Alpine MRD-M605

Alpine MRV-F450

Alpine SWR-1242D

RF 1 Farad Cap

Streetwires ZN Interconnects

KnuKoncepts Power Wire

Datwo

Member - Posts: 48

Joined: February 01, 2005

Posted: April 17, 2006 at 8:27 PM / IP Logged

wrecklesswun wrote:

the goal is to send pulses above 2-3 mph...as the video lockout occurs @ exactly 5 mph.

Actually it doesnt matter. You would do it when ever the radio is on. For the people that don't wanna wait for me on this you could try it yourself with a simple toggle switch. Just have a passenger flipping it while you drive. Try to flip it at the correct rate so that the brake is off just before the nag screen comes up and back on just before the nag screen comes up. I still don't know if this will even work but its worth a try.

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.