the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

lcd power


Post ReplyPost New Topic
< Prev Topic Next Topic >
plyrh8r1 
Member - Posts: 31
Member spacespace
Joined: April 29, 2005
Location: United States
Posted: March 18, 2006 at 11:04 AM / IP Logged  
i was wondering if i can run my 2 lcd screens power cord to my fuse block for my amps
xscash 
Copper - Posts: 317
Copper spacespace
Joined: March 05, 2006
Location: United States
Posted: March 18, 2006 at 11:58 AM / IP Logged  

sure just use the correct fuse for the lcd's

XS

plyrh8r1 
Member - Posts: 31
Member spacespace
Joined: April 29, 2005
Location: United States
Posted: March 18, 2006 at 12:03 PM / IP Logged  
do i need to use a relay
12tech 
Member - Posts: 8
Member spacespace
Joined: February 05, 2005
Location: United States
Posted: March 18, 2006 at 12:42 PM / IP Logged  
depends on how u want them to operate. i would suggest using a fuse and a toggle switch.
kam
xscash 
Copper - Posts: 317
Copper spacespace
Joined: March 05, 2006
Location: United States
Posted: March 18, 2006 at 3:20 PM / IP Logged  

are you trying to connect the power or the ign? if power then just connect.....you will need a relay if you are trying to control them from the remote wire.

XS

plyrh8r1 
Member - Posts: 31
Member spacespace
Joined: April 29, 2005
Location: United States
Posted: March 19, 2006 at 10:22 AM / IP Logged  
just power i will use a toggle swicth thanks for da help

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer