the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

fiberglass eyelids


Post ReplyPost New Topic
< Prev Topic Next Topic >
Sessland 
Copper - Posts: 58
Copper spacespace
Joined: July 02, 2005
Location: Mexico
Posted: April 09, 2006 at 6:38 PM / IP Logged  
sounds like you didn't have enough hardner mixed with the resin.
If you can, start over. I found it was way easier to start again rather than trying to fix or "improve" what I already screwed up.
pmpdoutexpo 
Member - Posts: 8
Member spacespace
Joined: March 22, 2006
Location: United States
Posted: April 10, 2006 at 2:02 PM / IP Logged  
well i worked on them this weekend but teh weather was doodiety and i dont have a garage so it was pretty difficult but i managed to figure it out once i got the body filler on the fiberglass it thickened up and became stiffer now they are all sanded and primed jusat need to be painted.
mustangfoo 
Silver - Posts: 371
Silver spacespace
Joined: November 16, 2005
Location: United States
Posted: April 26, 2006 at 1:22 PM / IP Logged  
wut happened to pics, are they finished???  If so slap some pics on here so we can all see how they came along.
playr747 
Copper - Posts: 65
Copper spacespace
Joined: August 28, 2002
Location: United States
Posted: May 04, 2006 at 2:21 PM / IP Logged  
Dont use cloth, use mat. Make the sahpe bigger than you need then shape it to the desired result. That should take care of the fraying. Take your time most important.
placid warrior 
Silver - Posts: 357
Silver spacespace
Joined: November 06, 2004
Location: Canada
Posted: May 07, 2006 at 5:35 PM / IP Logged  
i just made some eylids for my car
if the link doesnt work i'll try something else.
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer