the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2006 honda acc power


Post ReplyPost New Topic
< Prev Topic Next Topic >
xavierny25 
Member - Posts: 24
Member spacespace
Joined: July 28, 2004
Location: United States
Posted: March 24, 2006 at 7:38 PM / IP Logged  
hi guess and thanks for checking this out.I just did an sub woofer install on a 2006 honda accord and i found my self with this problem i tapped my remote wire to the acc power of what would be the lighter or phone charger outlet.after i did this the out let did not want to work i also have one in the center console and that doesnt work either.i check the fuse but thats fine.is there something i mite of over looked???????any help would be great thanks again
doibuy 
Copper - Posts: 177
Copper spacespace
Joined: March 15, 2006
Posted: March 24, 2006 at 7:51 PM / IP Logged  
Does your amp turn on?  If so, make sure you didn't unplug the lighter plug.  If not then go and check all of your fuses, there is probaly a fuse block under the hood, as well as inside the car.  I know that in a Honda Pilot, there are a couple of fuses for the lighter sockets, so the Accord may be the same way. 
xavierny25 
Member - Posts: 24
Member spacespace
Joined: July 28, 2004
Location: United States
Posted: March 24, 2006 at 7:55 PM / IP Logged  

no amp will not turn on.any know where i mite find any other fuse blocks in this car.and or if i should run any kind of test?

stevdart 
Platinum - Posts: 5,816
Platinum spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member consistently provides reliable informationspace
Joined: January 24, 2004
Location: Pennsylvania, United States
Posted: March 24, 2006 at 8:57 PM / IP Logged  
Owners manual in the glove compartment will show you where the fuse blocks are.  But there's a reason the fuse blew when you soldered that connection, so you should go back into that spot and remove the wire so you don't blow the new fuse.  See if you've connected something + to ground there.
Build the box so that it performs well in the worst case scenario and, in return, it will reward you at all times.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, April 25, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer