2006 Accord sub enclosure and amp rack

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / 2006 Accord sub enclosure and amp rack (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

nick0324

Member - Posts: 4

Joined: June 06, 2006

Posted: June 08, 2006 at 11:37 AM / IP Logged

very nice install man,

nice and clean and as the last guy said blends in wonderfully..

working on my own install but it's not that clean hahah

keep up the good work!

mouglie

Member - Posts: 23

Joined: April 30, 2006

Location: United States

Posted: June 11, 2006 at 6:20 AM / IP Logged

i still kinna question all that space used for the amp... was it really necessary to use fiberglass to mold the back piece in this case?

I shall never outrun my guardian angel - again.

HottAccord

Silver - Posts: 247

Joined: August 12, 2004

Location: United States

Posted: June 11, 2006 at 10:38 AM / IP Logged

Came out really good, Im glad you cut down the enclosure to correct the air space problem you might have run into. Keep up the good work! 2006 Accord sub enclosure and amp rack - Page 2 - Last Post -- posted image.

2006 Accord sub enclosure and amp rack - Page 2 - Last Post -- posted image.

Im a fiberglass whore!!

Sessland

Copper - Posts: 58

Joined: July 02, 2005

Location: Mexico

Posted: June 12, 2006 at 11:20 AM / IP Logged

mouglie wrote:

i still kinna question all that space used for the amp... was it really necessary to use fiberglass to mold the back piece in this case?

If you pay attention to the comments you'll notice that it's TEMPORARY. He's going to be swapping it out for a more powerful amp in the future.

Greg S

Member - Posts: 31

Joined: September 30, 2003

Location: United States

Posted: June 14, 2006 at 2:34 PM / IP Logged

HottAccord wrote:

Yeah, sort of felt foolish having to watse that much work and materials. The original plan was for the amp to be mounted toward the front end of the enclosure and the sub toward the back with each section chambered off but I sort of forgot about the arm for the trunk lid and where it would end up when closed. There just wasn't enough room for it to fit and look correct so off to the other side of the trunk it went. Not like I need access to the jack, i have a 2 ton floor jack in the garage. 2006 Accord sub enclosure and amp rack - Page 2 - Last Post -- posted image.

Greg Stoddard

slacker816

Member - Posts: 1

Joined: July 15, 2006

Location: United States

Posted: July 15, 2006 at 5:27 PM / IP Logged

nice your man but i would sugest geting a new amp. something better that that boozka. but that doodie looks great.

have no fear slacker is here!

transonic22

Member - Posts: 1

Joined: May 05, 2006

Location: Canada

Posted: July 16, 2006 at 7:51 PM / IP Logged

Very Clean looks good.. seems like a waste of material to make a full enclosure for the amp. but still it looks great.

smurphalurph

Member - Posts: 31

Joined: July 10, 2005

Location: United States

Posted: July 16, 2006 at 8:38 PM / IP Logged

Nice job, love the amp rack, looks rediculously familar,(like mine).

When you do things right, people won't realize you've done anything at all.

az_silverado

Member - Posts: 1

Joined: July 17, 2006

Location: United States

Posted: July 17, 2006 at 2:25 PM / IP Logged

Super clean job man.....how did you get the mat to lay down so nicely? Did you use a roller?

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2006 Accord sub enclosure and amp rack

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.