the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Compustar 2W900FM-AS starter kill


Post ReplyPost New Topic
< Prev Topic Next Topic >
bbtaco 
Copper - Posts: 119
Copper spacespace
Joined: November 03, 2002
Location: Virginia, United States
Posted: June 18, 2006 at 9:18 PM / IP Logged  
Does the starter kill on this RS also work as an anti grind when the vehicle has been remotely started?
spookiestylez 
Silver - Posts: 531
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2005
Location: Virginia, United States
Posted: June 18, 2006 at 11:16 PM / IP Logged  

if on the remote start harness it has a wire for the starter(key side) and starter (motor side) then it should

rtfm
aceracer24 
Copper - Posts: 140
Copper spacespace
Joined: May 30, 2006
Location: United States
Posted: June 19, 2006 at 12:36 AM / IP Logged  
I think this is an option that MUST be turned on either by the shop that installed or you can if you have the manual. It tells how to do it.
1968 VW Beetle
Pioneed DEH-780MP, 2 10' Memphis PR104D, Memphis PR500.1, TXC 6.1, MTX Thunder 8502
bbtaco 
Copper - Posts: 119
Copper spacespace
Joined: November 03, 2002
Location: Virginia, United States
Posted: June 19, 2006 at 11:19 AM / IP Logged  
I hooked it up according to these instructions:
Pin #6: Yellow- This wire is the (+) Starter output. This is pre-wired tothe starter-kill relay for ease of installation. At the starter-kill relay youwill see a yellow and yellow/black. These wires are used to interrupt thestarter wire in the vehicle. You will need to cut the starter wire in halfand connect the wire accordingly: Yellow/Black will connect to the keyside and the yellow will connect to the motor side (starter side).
aceracer24 
Copper - Posts: 140
Copper spacespace
Joined: May 30, 2006
Location: United States
Posted: June 19, 2006 at 11:52 AM / IP Logged  
Sorry, I got anti jack and anti grind confussed :) Anti-grind should be automatic as long as you have everything connected correctly...as far as I know.
1968 VW Beetle
Pioneed DEH-780MP, 2 10' Memphis PR104D, Memphis PR500.1, TXC 6.1, MTX Thunder 8502

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer